Delivery | ![]() ![]() ![]() ![]() ![]() |
Value for Money | ![]() ![]() ![]() ![]() ![]() |
Packaging | ![]() ![]() ![]() ![]() ![]() |
Ease of Setup/Use | ![]() ![]() ![]() ![]() ![]() |
Function/Performance | ![]() ![]() ![]() ![]() ![]() |
by pop USA ![]() on 2023-08-25 09:37:06 | ![]() ![]() ![]() ![]() ![]() | ![]() I installed this on an outside 120V light fixture and it works well. The light stays off during the day and only turns on at night when it detects movement (from heat-emitting bodies, such as people). Seems to me that this should eliminate triggering the light from things like blowing leaves, unlike the radio frequency sensors. Note that it needs direct-line-of-sight to work. It does not work through glass or anything else. The light will turn on from about 20 feet away. Directions say 40W maximum load. ![]() |
by kevin USA ![]() on 2023-08-23 19:39:40 | ![]() ![]() ![]() ![]() ![]() | ![]() The one picture showing the wiring is impossible to read.Simple stuff. Not sure how it's overlooked. ![]() |
by Florence Weeble USA ![]() on 2023-08-21 20:32:04 | ![]() ![]() ![]() ![]() ![]() | ![]() PSA - Pictured Shows Two Sensors is Actually One Sensor.Yes, I am at fault for not thoroughly reading the description. ![]() |
by Eric James USA ![]() on 2023-08-19 01:41:11 | ![]() ![]() ![]() ![]() ![]() | ![]() Works well. did not have a wiring diagram. found wiring info on line after some searching. ![]() |
by Gene W USA ![]() on 2023-08-17 03:26:53 | ![]() ![]() ![]() ![]() ![]() | ![]() The media could not be loaded. The sensor works. Won't deny that. But I'm going to have to get a different one that will allow it to function with daylight coming in. This one MUST be shaded or in a dark setting to function. I docked a star because I saw no mention of this in the ad.Installation was easy enough. The included wiring is TINY though, you definitely don't want much of a load on it at all. So much so that I went with a Solid State Relay being activated by this switch to kick on the fridge lighting even though it's only pulling a measured 37 watts.All in all not a bad piece. Small and inconspicuous, functional with unmentioned limitations. ![]() |
by Long Sam USA ![]() on 2023-08-15 02:59:42 | ![]() ![]() ![]() ![]() ![]() | ![]() They work OK but there is no way to get the light to stay on permanently and device only keeps light active for about 20 seconds. ![]() |
by Ewa Reader USA ![]() on 2023-08-13 20:55:45 | ![]() ![]() ![]() ![]() ![]() | ![]() The media could not be loaded. Received item missing piece on my order ![]() |
by RV USA ![]() on 2023-08-11 14:12:48 | ![]() ![]() ![]() ![]() ![]() | ![]() So I order two and received two of them. I used them at my driveway and my front door. They work well and I like that they function for about 30 seconds before turning off. The product does not come with any instructions but here's an example I used. On a single bulb powered by a single switch.....The two shorter YELLOW & BLUE wires go to the two leads from your light sourceThe two longer BROWN & BLUE wires hook up to the other two wires coming from the power supply. ![]() |
by Michael B. USA ![]() on 2023-08-09 11:10:02 | ![]() ![]() ![]() ![]() ![]() | ![]() This has got to be a joke. Bought it for ceiling light but upon seeing how thin and fragile the wires are, I decided it would be a big fire hazard for 110V line. This should be permitted for high voltage as claimed!! ![]() |