Appearance description:
1. LEDs for open phase inspection: Three orange LEDs, indicating U phase, V phase and W phase respectively.
2. LEDs for phase sequence inspection: one red LED and one green LED
3. Strap: put it on the wrist to prevent the instrument from slipping from the hand.
4. Test pens.
5. Test wire: red corresponds to U (R) phase (L1, R);
Yellow corresponds to V (Y) phase (L2, S);
Green corresponds to the W (B) phase (L3, T).
Description:
Name: Current Detector
Technical characteristics:
Working voltage: 60~600V (three-phase alternating current)
Maximum withstand voltage: 2000V/min (pulse voltage 4000V)
Measurable frequency range: 20Hz~400Hz
Continuous use time: no more than 60 minutes at 200V ACV, no more than 4 minutes at 600V ACV
Instrument size: 85 x 64 x 23mm (not including test leads)
Packing list: 1 set x Current Detector
Note:
Due to manual measurement, please allow 1-3 cm error, thank you
Due to screen and other objective reasons, there may be a certain color difference, please understand.
.