This product is out of stock, and not coming back.It may have been replaced by a newer version, see replacement/alternatives listed below.
--Radio detection distance: 6cm-10m
--Charging time: 2 hours continuous
--Working hours: 6-8 hours
--Power supply: Built-in lithium polymer battery 300mAh
--LED lighting at night
--Directional compass assistant.
Specification: Model: S100 Material: ABS Color: Black, Blue, Red Battery Capacity: 300mAh Working Current: 50mA Charging Time: 2 H Continuous Working Time: 6-8 H Vibration Sensor: LED; F5 Product Size: 82 X 45 X 13mm/3.23 X 1.77 X 0.51" Net Weight: 26g Gross Weight: 126g Instruction: One-key Alarm Reminder Function: 1: Turn on the side power switch. 2: Press the alarm prompt button, the red indicator light is on, working normally. Warm Tip: After pressing the alarm button, the alarm reminder function will be turned on after 5 seconds. Infrared Scanning Function: 1: Turn on the side power switch. 2: Press the infrared scan button, the corresponding red indicator light above the button and the LED lamp beads on the back enter into a synchronous flashing state. 3: Observe the scanning camera through the special filter lens of the window. Warm Tip: You can adjust and select the appropriate light flash frequency by long pressing the infrared scan button. Content: 1 *Anti-Candid Camera Scanner Detector 1 * Charging Cable 1 * Manual Note:Due to some errors in manual measurement, the actual object should be received as the criterion.