Using percentage of power supply is 80%, i.e the power of load is 240 watt, you should choose 300W output transformer, otherwise there is possibility to cause the earlier invalidation by person.
Automatic protection for: short circuit / overload / over voltage / high temp.
Wiring instruction for DC output: Please make the 3 outputs be joint to load while the load over 100W, this way be good for transformer's life span. Load's wattage not over 80% of rated power to be ideal performance.
.Description:
Item type:power supply
DC voltage: 12V
Rated current: 5A
Current range: 0-5A
Rated power: 60W
Ripple and noise (maximum): 200mV
Setting, rise time: 100ms / 110VAC
Hold time: 80ms / 110VAC
Frequency range: 47~60Hz
Voltage range: 90~265VAC
Power factor (typical): PF> 0.5
Efficiency (typical): 80%
Safety standard: CE mark (LVD), IP67
Storage temperature and humidity: -40~ + 80°C, 10~90%RH
Operating temperature: -30~ + 60°C (reference output load derating curve)
Working humidity: 20~90% RH without condensation (waterproof)
Emc test standard: EN 55015-2006, EN 61547-1995 + A1-2000, EN 61000-3-2-2006, EN61000-3-2-1995 + A2-2005 EN 61347-1-2008 EN 61347-2-13 -2006
NOTE:
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.
2. Ripple noise are measured at 20MHz of bandwidth by using a12 twisted pair-wire terminated with a 0.1uf 10uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
Package Include:
1 x product, 1 x Manual, 1 x box packaging
Note:
The colors deviation might differ due to different monitor settings.
.
