• Detect Ethylene Oxide gas leaks in hospital sterilizing equipment (it will detect the halogenated carrier gas).
• Detect SF-6 in high voltage circuit breakers.
• Detect most gases that contain chlorine, fluorine and bromine (halogen gases).
• Detect cleaning agents used in dry cleaning applications such as per chloroethylene.
• Detect halogen gases in fire-extinguishing system.

Description:

Item type: tool

Detect ethylene oxide gas leaks in hospital sterilizing equipment Detect SF-6 in high voltage circuit breakers Detect most gasses that contain chlorine, fluorine and bromine (halogen gasses) Detects cleaning agents used when dry cleaning such as perchloroethy Detects halogen gasses in fire extinguishing systems Detect ethylene oxide gas leaks in hospital sterilizing equipment
Detect SF-6 in high voltage circuit breakers
Detect most gasses that contain chlorine, fluorine and bromine (halogen gasses)
Detects cleaning agents used when dry cleaning such as perchloroethy
Detects halogen gasses in fire extinguishing systems
Operating temperature: 0°C to 52°C (30°F t 125°F)
Maximum sensitivity: 6gr/yr for all halogenated refrigerants
Response time: immediate
Work mode: continuous - no limitations
Warm-up time: approximately 6 seconds
Reset time: 2 to 10 seconds
Powered by: x4 AAA 1.5V batteries (not included)
Applications:
The WJL-6000 may also be used to:
Detect leaks in other systems and storage/recovery containers. It will respond to all halogenated (contains Chlorine of Fluorine) refrigerants.
This includes, but is not limited to:
CFCs e.g. R12, R11, R500, R503 etc.
HCFCs e.g. R22, R123, R124, R502 etc.
HFCs e.g. R134a, R404s, R125 etc.
Blends such as AZ-50. HP62. MP39 etc.
Packing list:
1 x Detector
1 x Black Bag

Notes:

The colors deviation might differ due to different monitor settings, please kindly understand.