How to use solder coreless gas MT-100:
to refil, hold refil can as pictureed(fuel transfer is dependent upon gravity). observe fuel level in transparent window and stop when 90% full.
Ignition sequence:
push the on/off adjuster upward toward tip to release gas and turn to mid position. then holding the unit away from the face and body, activate with the flint ignitor or regular lighter.
.Description:
Item type:Electric Soldering Iron
Adjustment:
1 the tip temperature can be adjusted by turning the on/off adjuster.
2 normally set the on/off adjuster forward to mid postiition when soldering or brazing.
3. it is not nessary for the tip to glow bright red to achieve fatisfactory soldering temperatures. experience will dictate the adjuster setting required.
4 excessive gas flow, flare-up or catalyst pulsing red may occur the regular is incorrectly adjusted, ie, set too high.
Package Include:
1 x product, 1 x Manual, 1 x box packaging
Note:
The colors deviation might differ due to different monitor settings.
.