- Before adding any additive to the injector, the shut off valve must be off. Uscrew the end off the injector.
- Put in the desired amount of additive.
- Screw the end back on the injector.
- Connect R134A R12 F22 coupler to the injector.
- Connect other end of the injector to the low side service port on the vehicle.
- Open the valve on the injector.
- With refrigerant attached, fill to proper pressure.
- When finished using the injector toool, clean well by using brake cleaner.
.Description:
Product Category:A/C oil and dye injector refrigerant tool
Material: aluminum alloy body + brass connector
Capacity: 1/4 oz/7.5ml, 1/2oz/15ml, 3/4oz/22.5ml, 1oz/30ml, 1 1/4oz/37.5ml, 1 1/2oz/45ml, 1 3/4oz/52.5ml, 2oz/60ml
Connection: 1/4 inch
Colour: Blue + silver
Measuring scale: engraved
R134A Tube Pressure: 600PSI-3000PSI
Weight:650g
Perfect for Home Office AC and Car AC
Tank capacity 2 oz
Check valve in outlet thread 1 / 4sae
R134a tube color, available in red, yellow and blue
R134a pipe pressure 600psi-3000psi
Packing list:
1 x A/C oil and dye injector refrigerant tool
1 x R-134a R410a R22 R12 snap coupler
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
.
