This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed.
High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off.
Program is written in ladder logic programming language, supports for GX-Developer, GX-work2.
Programming port is the port for program upload, download, test and monitor.
It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.
.Description:
Item type:tool
Model: FX1N-20mr
Working Voltage: DC24 V
Wide Power Supply Voltage: 10-28VDC
Baud Rate: 9600
Programming Software: for GX-Developer, for GX-work2.
Size: Approx. 86 x 73 x 20mm / 3.4 x 2.9 x 0.7inch
Weight: 120G
Module function:
1: This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run!
2: Some of the common features are shown as follows
3: Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds
4: When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
5: The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
6: Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
Packing list:
1 x PLC Board
Notes:
1-2cm error might exist due to manual measurements, please kindly understand. The colors deviation might differ due to different monitor settings.
.
