--This machine is mainly used for the connection of optical fibers, which can be further connected with ordinary optical fiber cables, jumpers and multiple single-mode, multi-mode and dispersion-shifted quartz optical fibers with a cladding diameter of 50μm-150μm.
--Applicable optical fiber: SM(G.652&G.657), MM(G.651), DS(G.653), NZDS(G.655) and self-defined optical fiber types
--Keep it clean and protect it against strong vibrations and shocks.
Description:
Product Category: Fusion Splicer
Applicable optical fiber: SM(G.652&G.657), MM(G.651), DS(G.653), NZDS(G.655) and self-defined optical fiber types.
Splicing loss: 0. 02dB (SM), 0. 01dB (MM), 0. 04dB (DS/NZDS).
Return loss: Over60dB.
Typical splicing duration: 9 seconds.
Typical heating duration: 26 seconds (configurable heating time and adjustable heating temperature ).
Optical fiber alignment: Precise alignment, fiber core alignment, cladding alignment.
Optical fiber diameter: Cladding diameter 80~150μm, coating layer diameter 100~1000μm.
Cutting length: Coating layer below 250μm: 8~16mm; coating layer 250~1000μm: 16mm.
Tension test: Standard 2N (optional).
Optical fiber clamp: Multi-function clamp for bare fiber, tail fiber, jumpers, leather line; changing clamp applicable for SC and other connectors for a variety of FTTx optical fiber and cable.
Amplification factor: 400 times (X axis or Y axis).
Heat shrink bush: 60mm, 40mm and a series of miniature bush.
Display:3.5 inches TFT color LCD display.Reversible, convenient for bi-directional operation.
External interface:USB interface, convenient for data download and software upgrade
Splicing mode: 17 groups of operation modes.
Heating mode: 9 groups of operation modes.
Splicing loss storage: 5000 latest splicing results are stored in the built-in storage.
Built-in battery:Supports continuous splicing and heating for not less than 200 times
Power supply:The built-in lithium battery 11.8V supplies the power, charging time≤3.5h;External adapter, input AC100-240V50/60HZ, output DC13.5V/4.81A.
Power saving: 15% of the power of the lithium battery can be saved
in a typical environment.
Working environment:Temperature: -10~+50℃, Humidity: <95%RH (no condensation), Working altitude: 0~5000m, Max. wind speed: 15m/s.
Packing list:
Power cord*1pc
Power adapter*1pc
Instruction Warranty Card*1pc
Brush*1pc
Tweezers*1pc
VCFS-3 fiber stripping forceps*1pc
VCFS-J1 leather wire pliers*1pc
AUA-X2 cutter*1pc
Cutting knife adjusting wrench*1pc
Knife adjusting wrench of fiber stripping pliers*1pc
Cutting knife anti-falling bag
Note:
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
.
