Go to TOP

VGOOD Brushless ESC 30A 2S-4S 32-Bit With 1.5A SBEC for Fixed Wing RC Airplane Spare Part Long version KSX3817

Product code: PTO_0EBGE4W6

$25.58 $31.07 

SOLD OUT
Quantity:
VGOOD Brushless ESC 30A 2S-4S 32-Bit With 1.5A SBEC for Fixed Wing RC Airplane Spare Part Long version KSX3817
Ship to: FREE SHIPPING to United States via Sunyou- Packet NO Tracking  
Supplier:CWY_HUB
Rank:5
Buy More... Get Lower PricesYes! We Ship To  us

Payment Guarantee:smile
Shipping Support:smile
Share To:
.
VGOOD Brushless ESC 30A 2S-4S 32-Bit With 1.5A SBEC for Fixed Wing RC Airplane Spare Part Long version KSX3817
VGOOD Brushless ESC 30A 2S-4S 32-Bit With 1.5A SBEC for Fixed Wing RC Airplane Spare Part Long version KSX3817
$25.58 
.

30A brushless ESC, support 2-8S (Please check ESC stcker to verify the speced celb ard power, more high volage items to be added).

FiM cutput frequency range is 8-24KHz Dierent PiM frequency can be set by programming card

Regular thole range is: 900us-2400us.

Max RPM: 300, 000 rolls(palos), 100 000 rolls (Poles), 500 000 rolls 412(polas).

Customized settings can be cone wth prog-card and controllar (Brake/ Non Brakel).

It supports setting mator forward Backward by progardt.

.

Specifications:
30A ESC:
PCB: DHGDLED180330SB
A3230A4SSB
Con.Current: 30A
Peak Current(10s): 40A
BEC: YES
Lipo: 2-4s
Programming: YES
BEC Output: 5.5V/4A
PWM: 8-18KHz
Weight: 20g(w/wire)
Size(PCB): 36*23.5mm

Packing List:
1 * 30A ESC

Satety points:
Due to brushless power aystem is powerful, improper using may cause the
personal nury and devce damage. Planse strictly follow the instructions tD
1. Please dont operate long time with the battery under-wohage t will reduce the
battery uBaga IMe and Esc woring efficiency.
2. Hease don t operate long bme when the ESC is oer temperature, otherwse t
will damage the MOS FET eas r a larg tme, otherwise will short the
3. Alease don' t let ESC awervolage
usage life of ESC.
4. Always keep al the thngs away from propeller whan working on a power
system with the battery connected
5. Lease pay attention to tha mator. Dont operate continually whon the motor
was blocked. Otherwse, i wll reduce the uBgge Ire of motor and Esc
8. Always use ESC in safe situaton
7. Bcken Esc cent oe used

OPERATION:
1. Throttle Calibration
Please set throttle when the first time to use the esc
Step: 1-Startup controller and push stick at highest throttle position.
Step: 2-Power on ESC, motor beeps " means high throttle set ok
Step: 3-Push stick to the lowest position, motor beeps I"means low
throttle is detected. then another " d"as confirmation that throttle is
set ok and ready, you can push stick to go
2. Setting(Brake ON/Brake OFF) by controller
Put the stick at middle-> Power on ESC->A sequence beeps and then follow with
single and repeat""-""-""…, means now it's in controller brake setting
procedure, - push stick to Max throttle( means Brake ON) or push stick to min
throttle(means Brake OFF)->a sequence beeps means setting ok and followed 2
beeps"" means ESC is ready
3. Normal start procedure:
Startup controller and push stick to Min throttle (if higher than 1800us, it will get
into throttle calibration ).
Connect ESC as connection diagram, power on ESC, ESC will detect battery
cells and motor beeps . For example 4 cells batter, beeps will be: . N
Then 2 beeps"." means ESC is ready.

.
Date Launched: Jun 02 2020
Previous     Next
All categories 