Battery: 2-3 cells Lipo, 4-9 cells NiMH. Suitable Car: 1/10 Crawler Brushed.

BEC: 6V/2A (switch mode).Perfect detail and high requirement make our product exquisite and long life span.

Built to strict quality control standards, high strength and long life service.

Description:

Name: esc

Cont. Current / Burst Current: 60A/320A.

Resistance: 0.0014ohm

Motor Type: brush motor.

Suitable Car: 1/10 Crawler Brushed.

Battery: 2-3 cells Lipo, 4-9 cells NiMH.

BEC: 6V/2A (switch mode).

Dimension: 32mm*37mm*18mm

Instuctions

Connect BEC wires with the receiver

Connect motor wires with ESC

Turn on the transmitter

Connect battery pack with ESC then switch on the ESC.

When the connection of motor and battery is finished, the motor emits "Beep" tone.

When the throttle stick is in the neutral position, the motor re-emits "Beep" tone.

The ESC is workable

Set the ESC

ESC uses the jumper cap to set battery type.

Programme card Appearance description: see more details in the picture

Initial Start Force: 5%, 13%, 21%, 32% (default value 5%)

(default value 3.1V)

Drag Brake Force: 100%, 90%, 80%, 70% (default value 100%)

Maximum Reverse Force: 95%, 75%, 50% (default value 95%)

5:3 Start Modes (Also called "Punch") from "soft" to "very aggressive" (default value Medium)

Programcard Method:

1. Connect BEC wires with the program car then turn on the ESC.

2. The Green LED flashes for 2 times then LED off, that is, the connecting program car with ESC is successful, and the Red LED on presents the current value of that item. Otherwise, the connecting is failed.

3. Please press the Key "" to select different programs

4. Please press the Key "" to select different value of the current program

Package list:

1x program card

Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.