This product is out of stock, and not coming back.It may have been replaced by a newer version, see replacement/alternatives listed below.
SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate theproblems associated with intermittent contact of a mechanical switch.
The switch also features a LiPo mode, by turning this on the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging.
Description:
Item type:SK-600054-02
Input Voltage: 4-12V Max. Current: 10 Amp Battery Mode: 1. NiHM / NiCad 2. LiPo Low Voltage Protection: 6.2V(LiPo) Operating temperature: 0-50°C Weight: 7g or less
SWITCH ON/OFF SETUP 1. NiMH/NiCad Battery Pack For switching on please press and hold the button for one second. The PWR LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on. 2. LiPo Battery Pack For switching on please press and hold the button for more than three second. The PWR LED and LIPO LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on.
Packing list:
1 x SK-600054-02
Note:
The colors deviation might differ due to different monitor settings.