--The motor has hight RPM precision bearings, high temperature neodymium magnet, hight purity copper windings maximizes conductivity .
--Providing hight power solder tabs as well as precision engineered for maximum energy conversion.
--The ESC is less resistance, less heat, more effective and built-in electronic ON/OFF switch, besides, it can support both sensored and sensorless motors.
--With Program Card, you could set cut-off voltage, brake and punch strength, drag brake and other parameters.
.Description:
Product Category: Motor
Brand: SkyRC
KV: 4000KV
Power supply: 2-3S LiPo battery
Watts: 400W
Rotor poles: 2
Turns: 8.5T
Resistance: 0.0142 Ohm
Weight:165g
Outer diameter: 36mm
Length: 53mm
Rotor: 12.5mm
Shaft diameter: 3.175mm
ESC:
Item size: 39 * 38 * 20mm
Item weight: 68g
Power supply: 2-3S LiPo battery, 4-9S NiMh battery
BEC output: 6V/3A
Constant current: 60A
Burst current: 380A
Resistance: 0.0007 Ohm
Fan: 8V/0.2A, Max 12.6V
Program Card:
Item size: 80 * 52 * 6mm
Item weight: 16g
Cut off voltage: AutoLiPo, None, 5V, 6V, 9V, 12V
Auto-LiPo cut off volts / cell: 3.0V, 3.1V, 3.2V, 3.3V
Drag brake: 0%, 10%, 20%, 30%
Brakes strength: 0%, 20%, 40%, 60%, 80%, 100%
Punch strength: 0%, 10%, 20%, 30%
Dead band: small, normal, large
Reverse type: Proportional Rev.Lock Out, Proportional w/o Reverse, FWD to Brake and Reverse
Motor timing (sensored only): none (0°), low (10°), middle (20°),high (30°)
ESC type: sensored or sensorless
Motor direction: normal, reverse
Package list:
1 x SkyRC 4000KV 8.5T 2P Brushless Sensored Motor
1 x CS60 60A Brushless Sensored ESC
1 x LED Program Card
1 x Set of Screws
1 x Cooling Fan
1 x Sensor Cable
1 x Connected Cable
1 x Sticker
.