Can use for 1:8 or 1:10 remote-control car steering, remote-control boat, etc.
Many steering gears must be tested under waterproof measures. Otherwise, they will not work properly after a few days. The glued circuit board and built-in invisible waterproof rings are all water-repellent.
.Specification:
Product Name: RB0126MG 25KG 90° 120° Large Torque Digital Servo
Motor: Core motor
Neutral Position: 1500μs/330hz
Angle: 90-120°±2°
Voltage Range: 4.8V-6.0V
Operating Speed(6.0V): 0.15''/60°
Stall Torque(6.0V): 26 kg.cm
Bearing: 2BB
Weight: 57g
Dimensions: 40.5X20X40.5mm
Connector Wire: JR 260mm Length
Feature:
Slow Start: Servo current is relatively strong when starting and reversing and the slow-start function help extend the life of the servo.
Block protection: When block appears or block angle greater than 3 degrees for 10 seconds or the current keeps at 2.5a or above, block-protected function starts and enable to release the blockage with the current drops to the standby state. The servo is back to normal once the remote control is free to rotate.
Waterproof: 7-in-total invisible waterproof rings are included in the steering gear and each of them is installed in the right place with reasonable structure. The circuit board is brushed by exclusive transparent glue for circuit board, the potentiometer is sealed by silicone and other structures are water-repellent as well.
Warm Tips:
There are small parts in package and please well-place them to avoid being swallowed by child.
Package Content:
1*Servo
Note:
All images and descriptions are for illustrative purposes only. The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement. We reserve the right to modify or revise the content at anytime without prior notice.
.
