--Radiolink R12DSM, 2.4G 12CH receiver.
--DSSS and FHSS spread spectrum working synchronousl.
--SBUS and PPM signal support, use for Radiolink transmitters AT9,AT9S,AT10 and AT10II, is the best choice for racing drone.
.Description:
Product categories: Receiver
Brand name: Radiolink
Item number: R12DSM
Channels: 12 channels
Working voltage: 4.8-6V
Working current: 40-180mA (input voltage: 5V)
Size: 30*15 MM
Weight: 2.5g
4096 section precision, 0.5us per section, servo anti-shake rudder.
Control distance: about 1100 meters ground and 4000 meters air, actually control distance depends on the environment.
Weight: 6g
Compatible transmitters: Suitable for RC6GS, RC4GS, RC4G, RC3S, T8FB
Two signal working mode:
Blue/purple LED, SBUS signal, 12 channels totally.
Red LED always, PPM signal, 12 channels totally.
SBUS and PPM signal change:
Short press the ID SET switch two times within 1 second, the signal is changed from SBUS to PPM. The red LED indicates the PPM and blue/purple indicates SBUS.
How to bind with transmitter:
1. Place the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R12DSM.
3. There is a black button on the R12DSM, press the binding button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on!
Packing list:
1X Radiolink R12DSM 2.4G 12CH DSSS FHSS Receiver
Note: the different screens can cause the color of the item in the image to be a little different from the actual one. The allowed measurement error is +/- 1-3 cm.
.
