--72-channel u-blox M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C.
--On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking.
--Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity.
--Build-in embedded GNSS patch antenna, low power consumption
--The 15 x 15 mm patch antenna provides the best compromise between the performance of a Right Hand.
.Description:
Name: Matek Systems Ublox SAM-M8Q GPS Module
Dimensions: L26 x W16 x H7.5 mm
Weight: 7 gram
Input voltage range: 4~6V
Uart (Tx,Rx) interface
Battery for HOT module start
Power LED(Red) & Time pulse LED(Blue)
Baudrate 9600 default
Can be easy mounted in your case by double sided tape
Supported by INAV/Betaflight/Ardupilot, ect.
-Max navigation update rate:
Single GNSS up to 18 Hz
2 Concurrent GNSS(GPS &GLONASS) up to 10 Hz
-Horizontal position accuracy(GPS & GLONASS) 2.5 m CEP
-Velocity accuracy 0.05m/s
-Cold start 26 s
Aided cold starts: 2 s
Hot start 1 s
-Sensitivity:
Tracking &Navigation: –165 dBm
Reacquisition: –158 dBm
Cold start: –146 dBm
Hot start: –155 dBm
Package Included:
1x SAM-M8Q GPS module
1x SH1.0-4P 15cm silicon wire
1x Transparent PVC Heat-shrink tube
Note: Due to the light and screen setting difference, the color may be slightly different from the pictures.
Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so much.
.
