Go to TOP

Holybro Kakute F7 V1.5 Flight Controller & 65A BL_32 Tekko32F3 Metal 4in1 ESC 4-6S Stack Combo for RC Drone Kakute F7

Product code: PTO_0B6YW9N6

$123.04 $146.73 

SOLD OUT
Quantity:
Holybro Kakute F7 V1.5 Flight Controller & 65A BL_32 Tekko32F3 Metal 4in1 ESC 4-6S Stack Combo for RC Drone Kakute F7
Ship to: FREE SHIPPING to United States via YUNTU--Special Priority Line Registration  
Supplier:JYL_SHOP
Rank:4.4
Buy More... Get Lower PricesYes! We Ship To  us

Payment Guarantee:smile
Shipping Support:smile
Share To:
.
Holybro Kakute F7 V1.5 Flight Controller & 65A BL_32 Tekko32F3 Metal 4in1 ESC 4-6S Stack Combo for RC Drone Kakute F7
Holybro Kakute F7 V1.5 Flight Controller & 65A BL_32 Tekko32F3 Metal 4in1 ESC 4-6S Stack Combo for RC Drone Kakute F7
$123.04 
.

The 4in1 has onboard analog current sensor, and TLM function(then no current reading over TLM).

Using metal case mosfet for better Heat dissipation.

BLheli_32 firmware, support Oneshot, Multishot, Dshot150, DShot300, DShot600 and DShot1200.

.

Description:

Item type:Flight Controller

Kakute F7 V1.5 Flight Controller ( Manual )

Brand name: Holybro

Item name: Kakute F7 V1.5

MCU: STM32F745 32-bit processor

IMU: MPU6000 (SPI)

Barometer: BMP280
Current Sensor: Approximately 130 amps maximum measurable value

USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)

6 hardware UARTS (UART1,2,3,4,6,7)

All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without uninvert hack.

Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.

TF card for Blackbox logging

Dimensions: 35x41x7mm (includes foam-mounted gyro board in height)

Mounting Holes: Standard 30.5mm square to center of holes

Weight: 8g

 

Tekko32F3 Metal 4in1 ESC Manual

Brand Name: Holybro

Model: Tekko32F3 Metal 

F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz

The 4in1 has onboard analog current sensor, and TLM function(then no current reading over TLM)

Using metal case mosfet for better Heat dissipation

Supports Lipo 4-6S

Ext. cap needed for 6s (470uf 35v for 6s usage.)

Size:42 x 42 mm

Mounting holes:30.5×30.5mm

Weight: 12g

Packing list:

1x Kakute F7 flight controller
1x Tekko32 F3 Metal 4in1 ESC 
1x 470uF 35V Electrolytic Capacitor
1x 8pin to 8pin 1mm pitch 65mm Cable
1x 8pin to 8pin 1mm pitch 25mm Cable 

Notes:

The colors deviation might differ due to different monitor settings, please kindly understand.

.

Customer Reviews(0)

5 out of 5
5 star rating 5 star rating 5 star rating 5 star rating 5 star rating
Holybro Kakute F7 V1.5 Flight Controller & 65A BL_32 Tekko32F3 Metal 4in1 ESC 4-6S Stack Combo for RC Drone Kakute F7
Deliverystarrs 5starrs 5starrs 5starrs 5starrs 5
Value for Moneystarrs 5starrs 5starrs 5starrs 5starrs 5
Packagingstarrs 5starrs 5starrs 5starrs 5starrs 5
Ease of Setup/Usestarrs 5starrs 5starrs 5starrs 5starrs 5
Function/Performancestarrs 5starrs 5starrs 5starrs 5starrs 5
Write Review
Date Launched: Jun 02 2020
Previous     Next
All categories 