HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. Supports Betaflight, Butterflight, and Cleanflight.
Dedicated bootloader button for easy firmware flashing; Low-profile design fits into even very compact frames.
The GH port available on the board makes it much more convenient for you to connect HolyBro Kakute F7 HDV to the DJI FPV VTx, for both signal and power.
.Specification
Product Name: Kakute F7 HDV Flight Controller
MCU: STM32F745 32-bit processor
IMU: PMU6000
Barometer: BMP280
Weight: 8g
Size: 35x35mm
TF card for Blackbox logging
Mounting Holes: Standard 30.5mm square to center of holes
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
6 hardware UARTS (UART1,2,3,4,6,7)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not
supported.
Features:
Supports BLHeli pass-through for easy ESC upgrade and configuration.
High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.
Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units.
Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV monitors voltage directly from the power supply.
Filtered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up
to 2A to DJI FPV VTx.
Packing list:
1 x Kakute F7 HDV Flight Controller
Notice:
All images and descriptions are for illustrative purposes only. Product specification, functions and appearance may vary by actual usage. The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement. We recommend you could check with sales for exact offers if need.
.
