Current Sensor: Approximately 130 amps maximum measurable value
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
6 hardware UARTS (UART1,2,3,4,6,7)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without "uninvert hack".
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
.Specification:
Brand Name: Holybro
Model: Kakute F7 V1.5 AIO & Tekko32 F3 Metal Combo
Tekko32 F3 Metal ESC
Model: Tekko32 F3 Metal
Item Name: 65A BL_32 DShot1200 ESC
Quantity: 4Pcs
Con. Current: 65A
Peak Current: 80A
Input Voltage: 3-6S Lipo Support
Ext. cap needed for 6s (220uf 35v for 6s usage.)
- F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz
- Mosfet tested at 4S 65A, under props, nothing covered for 1min
- Onboard WS2812B LED
Size: approx. 18 x 27 mm
Weight: approx. 4.4g/pc
Kakute F7 V1.5 AIO Flight Controller ( Manual)
Item Name: F7 V1.5 Flight Controller AIO OSD BEC and Current Sensor
MCU: STM32F745 32-bit processor
IMU: MPU6000 ( SPI)
Barometer: BMP280
Current Sensor: Approximately 130 amps maximum measurable value
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
6 hardware UARTS (UART1,2,3,4,6,7)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without "uninvert hack".
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
TF card for Blackbox logging
Dimensions: approx. 35x48x7mm (includes foam-mounted gyro board in height)
Mounting Holes: Standard 30.5mm square to center of holes
Weight: approx. 11.2g
Packing list:
4 x Holybro ekko32 F3 Metal ESC 65A
4 x 35V 220uF Capacitor
4 x 24AWG 100mm Black wire
4 x 24AWG 100mm White wire
4 x 24AWG 100mm Blue wire
4 x 16AWG 100mm Red wire
4 x 16AWG 100mm Black wire
1 x Kakute F7 V1.5 Flight Controller Board
.