Go to TOP

Holybro 433Mhz 915Mhz 500mW Transceiver Radio Telemetry Set V3 for PIXHawk 4 Flight Controller

Product code: PTO_057D5H2S

$57.93 $68.35 

SOLD OUT
Quantity:
Holybro 433Mhz 915Mhz 500mW Transceiver Radio Telemetry Set V3 for PIXHawk 4 Flight Controller
Ship to: FREE SHIPPING to United States via YUNTU--Special Priority Line Registration  
Supplier:Fressco
Rank:4.5
Buy More... Get Lower PricesYes! We Ship To  us

Payment Guarantee:smile
Shipping Support:smile
Share To:
.
Holybro 433Mhz 915Mhz 500mW Transceiver Radio Telemetry Set V3 for PIXHawk 4 Flight Controller
Holybro 433Mhz 915Mhz 500mW Transceiver Radio Telemetry Set V3 for PIXHawk 4 Flight Controller
$57.93 
.

It is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m "out of the box"(the range can be extended to several kilometers with the use of a patch antenna on the ground).

The radio uses open source firmware which has been specially designed to work well with MAVLink packets.

And to be integrated with the Mission Planner, Copter,Rover, and Plane.

.

Description:

Item type:433Mhz OR 915Mhz Radio Module with antenna

Brand Name: Holybro

Version: 433Mhz / 915Mhz ( Optional)

Item Name: 500mW Transceiver Radio Telemetry Set V3

Application: Compatible for Pixhawk 4 Flight Controller

Size: 26 x 53 x 10.7mm (without antenna)

Processing

100 mW maximum output power (adjustable) -117 dBm receive sensitivity

Open-source SIK firmware

RP-SMA connector

2-way full-duplex communication through adaptive TDM UART interface

Transparent serial link

MAVLink protocol framing

Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle

Error correction corrects up to 25% of bit errors Open-source SIK firmware

Configurable through Mission Planner & APM Planner

FT230X is a USB to BASIC UART IC

Power

Supply Voltage: 5VDC (from USB or JST-GH)

Transmit Current: 500 mA at 27dBm

Receive current: 25 mA

Serial interface: 3.3 V UART

Status LEDs

The radios have 2 status LEDs, one red and one green. The meaning of the different LED states is:

Green LED blinking - searching for another radio

Green LED solid - link is established with another radio

Red LED flashing - transmitting data

Red LED solid - in firmware update mode

Connecting to Pixhawk4

Use the 4 pin JST-GH connector that should have come with the radio to connect the radio to your Pixhawk4's "Telem 1"

("Telem 2" can also be used but the default recommendation is “Telem1”).

Connecting to a PC

Connecting the radio to your Windows PC is as simple as connecting the micro USB cable

(which should have been included with the radio) to your PC.

The necessary drivers should be installed automatically and the radio will appear as a new “USB Serial Port”

in the Windows Device Manager under Ports (COM & LPT).

The Mission Planner’s COM Port selection drop-down should also contain the same new COM port.

Package Include:

2x 433Mhz OR 915Mhz Radio Module with antenna

1x Micro-USB cable

1x Android OTG adapter cable

1x GH 6P-GH 4P cable

1x MLX 6P-GH 4P cable

2x SMA Adapter

Note:

The colors deviation might differ due to different monitor settings.

.

Customer Reviews(0)

5 out of 5
5 star rating 5 star rating 5 star rating 5 star rating 5 star rating
Holybro 433Mhz 915Mhz 500mW Transceiver Radio Telemetry Set V3 for PIXHawk 4 Flight Controller
Deliverystarrs 5starrs 5starrs 5starrs 5starrs 5
Value for Moneystarrs 5starrs 5starrs 5starrs 5starrs 5
Packagingstarrs 5starrs 5starrs 5starrs 5starrs 5
Ease of Setup/Usestarrs 5starrs 5starrs 5starrs 5starrs 5
Function/Performancestarrs 5starrs 5starrs 5starrs 5starrs 5
Write Review
Date Launched: Jun 02 2020
Previous     Next
All categories 