Stable performance, large current, simple control, no need to set up, strong compatibility, wide application, small size and light weight.
This electronic switch is recommended to be controlled by a 2-segment switch, and the on and off strokes each account for half of the rudder.
When the switch is turned on, there is an LED light indicating that the current cannot exceed the normal value, otherwise the wire may be heated or burned.
.Specification
Product Name: Electronic Switch
Switch input voltage range: 3.7-27V
Warm tip: This switch is not suitable for controlling led lights
Feature
Applied to remote control model car airplane Light bar Light on and off Application is simple and convenient - Insert switch channel.
Power switch for various power supply and controlled equipment (disconnected to positive pole, common negative).
Electronic ignition, the output stage can be connected to the resistance heating wire.
The electric start control increases the relay and the water pump switch.
The wire adopts high current 18AWG silica gel wire, the plug is JST head (input female, output male), the signal wire is also made of super soft silicone wire material, the total length of power cord is about 20CM, the switch weight is about 11G.
Packing list
1*Switch
Notice:
All images and descriptions are for illustrative purposes only. Product specification, functions and appearance may vary by actual usage. The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement. We recommend you could check with sales for exact offers if need.
.