--This 1/10 60A Sensored Combo set is ready to run out of box, coming with 60A Sensored ESC, Sensored Motor and Program Card.
--This combo is perfect for 1/10th scale Car. When you connect the ESC with the program card, you could tune and tweak all your favorite settings.
--There are hight RPM precision bearings, high temperature neodymium magnet
and sensor-based for excellent torque and low-speed drivability.
.Description:
Product Category: Motor
KV: 1870KV
Power supply: 2-3S LiPo battery
Watts: 200W
Rotor poles: 2
Turns: 17.5T
Resistance: 0.0514 Ohm
Weight:165g
Outer diameter: 36mm
Length: 53mm
Rotor: 12.5mm
Shaft diameter: 3.175mm
ESC:
Item size: 39 * 38 * 20mm (without cable)
Item weight: 30g (without cable)
Power supply: 2-3S LiPo battery, 4-9S NiMh battery
BEC output: 6V/3A
Constant current: 60A
Burst current: 380A
Resistance: 0.0007 Ohm
Fan: 8V/0.2A, Max 12.6V
Program Card:
Item size: 80 * 52 * 6mm
Item weight: 16g
Cut off voltage: AutoLiPo, None, 5V, 6V, 9V, 12V
Auto-LiPo cut off volts / cell: 3.0V, 3.1V, 3.2V, 3.3V
Drag brake: 0%, 10%, 20%, 30%
Brakes strength: 0%, 20%, 40%, 60%, 80%, 100%
Punch strength: 0%, 10%, 20%, 30%
Dead band: small, normal, large
Reverse type: Proportional Rev.Lock Out, Proportional w/o Reverse, FWD to Brake and Reverse
Motor timing (sensored only): none (0°), low (10°), middle (20°),high (30°)
ESC type: sensored or sensorless
Motor direction: normal, reverse
Package list:
1 * 17.5T 2P Brushless Sensored Motor
1 * CS60 60A Brushless Sensored ESC
1 * LED Program Card
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
.
