--Race Spec Performances.

--High Strength N52 Neodyum Magnets.

--Active Cooling Fins Greatly Reduce Motor Temeratures.

--Low CG, Light Weight Design.

--Japanese Bearing For Performances.

--Enchance Anti Off U Ring For Safety & Stablility.

--Dual Lock CW / CCW Locknuts.

Description:

Product Category:RC Airplane Frame

RS2205 2300KV 2205 CW/CCW:
Model: RS2205-2300
Framework: 12N14P
No. of Cells: 3 - 4S
Color: Red
Length: 31.7mm
Shaft: M5
KV: 2300
Max Thrust: 1024g
Diameter: 27.9mm
Propeller Suggested: HQ 5045 BN
Weight: 30g

FVT LITTLEBEE BLlheli-s SPRING 30A ESC 2-6S:
Product Features
latest BLHELI_S program
The chip EFM8BB21F16, frequencies up to 48MHz
support Oneshot125, Oneshot42, Multshot, Damped Light
Technical Parameters:
Continuous current: 30A
Instantaneous current (10 seconds): 35A
BEC Output: None
Input voltage: 2-6S Lipo
Program: BLHELI-S

XL5 232 Carbon Fiber FPV Raicng：
Specification:
Brand name: HSKRC
Item name: XL5/6/7/8/9 Frame kit
Wheelbase: 232/283/294/360/390mm
Meterial: Carbon Fiber + Aluminum column
Arm board: 4mm
Center board: 2mm
Camera install distance: 22mm
Frame Space: 23mm (Support 2 board flytower)
Flight Controller: F3/F4 30.5x30.5mm install hole
Frame Arm Spare Parts, Click here.

betaflight F4 Pro V3 Flight Controller：
Properties:
Following in the footsteps of the omnibus F3 Pro, the omnibus F4 Pro V3 can be the standard by which all other flight controllers are measured.
Boasting a F4 processor, on-board Betaflight OSD, MicroSD Black Box, 5v3a sbec, video filter, you'll be tuning pids with your transmitter and
Tear it to the track in no time!
With leaps and bounds in programming, it's now possible to connect their Smart Audio VTX location like the TBS Unify Pro 5G8 HV or TBS Unify Pro 5G8 HV Race Edition to the J10 header with our omnibus smartaudio plugs and make VTX changes on the fly through the Betaflight OSD.

Item name:F4 Pro V3 Flight Controller
Size: 36x36mm
Mounting holes: 30.5x30.5mm
STM32 F405 MCU
Dshot support
Drag and Drop OSD configured via Betaflight Configurator
Smart Audio v2 support Tune your PID's and configure the omnibus fc from their transmitter
MPU6000 6 axis SPI gyro & accelerometer
SBUS / PPM AND Spketrum DSMX ports
MicroSD card blackbox
Baro (BMP280)
5v3a SBEC
On-board video filters (only 5V to VTX and camera)
SmartAudio V2 via tx6 to J10
4 × 3 pin ESC pin layout
IR pins for lap timing transponder

KINGKONG 5040 5045 5050 3 blades Propellers :
tem specifics
Material: Plastic
Plastic Type: ABS
RC Parts & Accs: Spinners
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Airplanes
Model Number: JJ61989
Technical parameters: Value 2
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: RC Propeller
Remote Control Peripherals/Devices: RC Propeller
Tool Supplies: RC Propeller
Product Description

PDB Power Distribution Board XT60 W/ BEC 5V & 12V:
The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
It offers a XT60 socket to connect the LiPo pack conveniently.
General:
-Input voltage range (3S-4S LiPo operation): 9 - 18V DC
-Regulated 5V and 12V outputs
-LED power indicators ( 5V & 12V outputs )
-6 ESC outputs & 1 pair VCC/GND pads
ESC outputs:
-Continuous current: 25A*4 or 15A*6
-Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
-Designed for RC Receivers, Flight controllers, OSD, and Servos.
-DC/DC synchronous buck regulator.
-Voltage: 5.0 +/- 0.1VDC
-Continuous current: 2 Amps (Max.2.5A 10s/minute)
-Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
-Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
-Designed for Video TX or FPV camera with linear regulator
-The battery should be 4S LiPo (13~18V DC)
- Voltage: 12.0 +/- 0.3VDC
-Continuous current: 500mA (Max.0.8A 5s/minute)
-Short-circuit tolerant (2 seconds/minute)
BEC 12V @ 3S LiPo
-Output voltage= 3S LiPo voltage -1V
Physical:
-Dimensions: 36 x 50 x 4 mm (without XT60)
-Mounting: 30.5 x 30.5mm, Φ3mm
- Weight: 7.5g(w/o XT60), 11g(w/ XT60)

Packing list:

1 * PDB XT60 with BEC 5V/12V
1* XL5 232mm Carbon Fiber
4* ESC LITTLEBEE BLlheli-s 30A
4*RS2205 2300kv CW CCW motor
7*5040 cw ccw Propelle
1*F4 V3 pro Flight Controller

Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.