Feature:
1. Supports compatible for PS4, xbox one, for switch, for PS3, for xbox 360 gaming device platforms using original wired game controllers.
2. Converter only, other accessories demo in pictures not included.
Description:
Product name: Converter
Key mouse converter: This product supports the use of original wired game consoles on PS4, Xbox one, switch, PS3 and Xbox 360 game equipment platforms.
Product appearance drawing:
1: Type-C motherboard interface.
2: Joystick guidance interface.
3: Keyboard and mouse interface 1.
4: Keyboard and mouse interface 2.
5: Joystick 1 light.
6: Key and mouse 1 light
7: Key and mouse 2 light.
8: Set the mode light.
Interface function introduction:
1. The type-C motherboard interface is used to connect the game platform host.
2. Joystick guidance interface. When the joystick is plugged in, the joystick 1 light will be on.
3. The keyboard and mouse interface 1 can be inserted into the keyboard or mouse. After insertion, the button and mouse 1 light will be on.
4. The keyboard and mouse interface 2 can be inserted into the keyboard or mouse, and the button and mouse 2 light will be on after insertion.
Product function setting:
1. Before setting, please use the type-C data cable to connect the game device host and the key mouse converter. The game handle, keyboard and mouse are connected to the key mouse converter. The game handle 1 light, key mouse 1 light and key mouse 2 light on the key mouse converter must be on.
2. Press the keys F12 and F11 on the keyboard at the same time, and the red circle setting mode led in the figure above is on, indicating that the setting mode is entered.
3. Press and hold any function key on the handle (the direction button is pulled up, down, left and right to the end), then click the function of the keyboard or mouse button to be set, and then release the key and mouse button on the handle to complete the single key setting;
4. Repeat the operation in point 3 above to set other functions on the handle.
5. Press the keys F12 and F11 on the keyboard at the same time, and the red circle setting mode led in the figure above is off, indicating that the setting mode is exited and the set keys on the keyboard can be used normally.
Matters needing attention:
1. The light of joystick 1 does not light up:
(1) Check whether the interface is connected properly and confirm that the handle is a wired control handle;
(2) When the switch host is plugged into the original wired handle and the button mouse converter game handle 1 light is not on, enter the handle setting of the main interface in the main interface and change the grip method / sequence to a wired handle; The light of joystick 1 of key mouse converter is on, and the key mouse converter can be set normally.
(3) PS4 host only supports the original cuh-zct2 series game handle. When the host is plugged into the original wired handle and the button mouse converter game handle 1 light is not on, enter the setting at the main interface, find the peripheral equipment, click the controller, select the connection method and click USB connection; The light of joystick 1 of key mouse converter is on, and the key mouse converter can be set normally.
2. When the button and mouse light is not on, check whether the interface is connected properly and whether the keyboard or mouse is damaged and can not be used.
3. If the handle function key is not pressed during the setting process, the original set key function on the keyboard or mouse will be cleared; Push the 3D direction to the bottom (only up, down, left and right directions are supported). The cross key can support 8 directions.
Mouse sensitivity selection:
1. This function is to adjust the moving speed of the mouse, which can be selected according to the game control requirements. The default value is 4, and press key at the same time_ F12 and the number keys 1-9 above the English letters. 1 is the lowest sensitivity and 9 is the highest sensitivity
Mouse Y-axis direction switching:
1. The control direction of the Y-axis of some games is set to the opposite direction, and the user can choose according to the game control needs and usage habits.
2. Press F12 and y at the same time to switch the y-axis direction of the mouse
Function switching
1. Set mode key_ F12 + KEY_ F11。
2. Select key in the page area_ F12 + KEY_ F1-KEY_ F8。
3. Mouse sensitivity selection, key_ F12 + KEY_ 1-KEY_ 9。
4. Mouse Y-axis direction switching key_ F12 + KEY_ Y。
5. Deadband setting key_ F11 + num (without this function).
6. Page area 1 returns the default key_ F12 + KEY_ F10 + KEY_ F1 (long press for 3 seconds).
7. Page area 2 returns the default key_ F12 + KEY_ F10 + KEY_ Press F2 for 3 seconds.
8. Page areas 1 and 2 return to the default key_ F12 + KEY_ F10 + KEY_ F9 (long press for 3 seconds).
9. ISP function KEY_ F12 + KEY_ F10 + KEY_ ESC (long press for 3 seconds)
Packing list:
1 x Converter
1 x Carton
Note:
1. Due to manual measurement, please allow 1-3 cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.
.
