--Compatible for n-switch game consoles.

--Better feel and higher precision. With vibration and dynamic detection function.

--Slide rails, mounted on the main unit or used with a wrist strap.

--Type-C charging interface, battery powered design.

--LED indicator, Bluetooth wireless connection.

--Non-slip texture design, more comfortable to hold.

Description:
Product Name: Game Console Kit
How to pair the handle to NSW for the first time
Important:
1. The NSW host must be in the power on state. If the host is in the sleep or power off state, the handle cannot complete pairing
2. If the handle cannot be awakened or the LED indicator continues to flash slowly, please charge your handle before using it
When pairing for the first time, please refer to the following steps:
1. Turn on the switch host
2. Install the handle on the switch host: use the slide on the side of the host to slide the handle from top to bottom until you hear a gentle click
3. The handle starts automatic registration and pairing. After successful pairing, it can be inserted into the host or removed
Connect via Bluetooth:
After the handle is installed on the host, the pairing cannot be registered. Please refer to the following methods to check the pairing problem:
1. Make sure your host has been upgraded to the latest system
2. Press the pairing key to close the handle, reset the connection of the handle, and then plug the handle into the host
3. Insert the handle into the host to ensure that the insertion direction is correct, there is a slight click sound when it slides to the bottom
4. Unplug the handle from the host and try to insert it again. It is ruled out that it is impossible to pair because it is not well contacted
5. If the handle cannot be awakened, please charge your handle and try pairing again
How to pair (reconnect) the handle to the NSW again:
After the handle completes the initial pairing, the handle can be connected to the host again in the following two ways
Method 1 Bluetooth connection pairing:
1. Turn on the switch host
2. Press any function key (except the rocker) for 2 seconds to wake up the handle, and then the handle will automatically connect and pair with the host through Bluetooth, which can be completed in about 4 seconds
3. Once the pairing is successful, the corresponding LED indicator of the handle will be on for a long time
Mode 2 wired connection pairing:
1. Turn on the switch host
2. Install the handle on the host through the slide on the side of the host
3. After that, the handle will automatically back connect and pair with the host through wired mode, and the back connection and pairing can be completed in about 4 seconds
Paired question answer:
When the handle is inserted into the host, it cannot be paired. Please refer to the following methods to check the paired handle or method
Method 1: delete the pairing information of the switch host
1. In the main interface, select [setting], then click [handle and sensor], and select [disconnect from handle]
2. Long press the X key of the handle to disconnect the host from all handles and release the matching
3. Match all the handles that need to be used again
Method 2: press the pairing key of the handle, reset the handle connection and pair again. Remove the handle from the host, press the pairing key of the handle, reset the connection of the handle, and pair the handle to the host again
Method 3: make sure that the handle has been slid into the slide of the host machine in the correct way, and slide the handle to the bottom
Method 4: charge your handle, because the battery of the handle must be in the low power state during transportation. When you get the handle, the handle may be in the low power state and cannot be turned on
Method 5: make sure the host is the latest system
Method 6: try several times to remove the handle from the host and then connect it
How to use amiibo data:
Take the legend of Zelda as an example:
1. Turn on the host, pair the left and right handles, and then remove them from the host
2. Enter the interface of reading and writing amiibo dolls in the game (different games have different ways to open amiibo functions. Please enter the interface of reading and writing amiibo dolls according to specific game operations)
3. Press the [+] and [home] keys on the right handle to switch to the corresponding game. The judgment basis is that the corresponding LED indicator of the handle flashes for 5 seconds, and the legend of Zelda should be that led 1 flashes for 5 seconds (for example, LED2 and LED3 flash for 5 seconds at the same time, which means that they have switched to the kabi of stars)
4. Press and hold the R3 key on the right handle, and then press and hold the L key to turn on the function of brushing amiibo until gifts appear in the game
5. Repeat the operation in step 4, and the handle will read the next amiibo data, and so on (for example, in the legend of Zelda: the breath of the wilderness can be brushed 500 times, but due to the setting of the game, the amiibo data may be repeated, and the game shows that the amiibo can no longer be used today, please press to continue to switch the data)
How to play the background execution mode of fitness ring adventure with the handle:
In adventure mode, easy mode and custom mode, the operation of this product is the same as that of the original handle
Please operate according to the game tips
Pairing method of handle in background execution mode:
1. Enter the game and install the left handle into the leg strap and the right handle into the fitness ring according to the game tips
2. Select [background execution mode] in the game interface, and then turn off the game console according to the prompt
3. Press and hold the [home] key of the right handle for about 4 seconds. If the background mode of the handle is turned on successfully, the player indicator will light up 4 lights and have vibration feedback
Method for the handle to exit the background execution mode: briefly press the R3 key of the right handle, and the handle can exit the background execution mode
Packing list:
2 x Game Console
1 x Charging Line
1 x Instructions
1 x Carton
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.