• --Life waterproof: refers to anti-splashing, can not bathe or soak, keep away from hot water and steam
• --Strap size: The length of the strap is designed and produced according to the large wrist diameter, which is suitable for general wrist diameters.
• --Function: LED display time, month, day, second. 12-hour format, one-button operation.
• --In power saving mode, if there is no button action within 3 seconds, the screen display will turn off by itself

Description:
Name: Wrist Watch
Product function and timing steps,
A function overview
1. LED display time, month, day, second.
2., 12-hour format, one-button operation.
3. In power saving mode, if there is no button action within 3 seconds, the screen display will turn off by itself
B, mode selection
1. First press the button to display the startup screen.
2. Click the buttons in order to watch (hour/minute), date (month/day), and second.
3 Note: The small dot display in front of the hour indicates the "PM" time period.
C. Data Settings
1. Press and hold the button for 3 seconds to enter the setting mode during the "time display", the number of "clock" is flashing, and when the number of "clock" is flashing, release the button, press the button, adjust the current value, and the clock is adjusted.
2. Continue to press the button for 3 seconds and the "minute" flashes. When the "minute" flashes, release the button, press the button, adjust the current value, and adjust the minute.
3. When the number "Y00" (Y represents the year) is flashing while continuing to press the button for 3 seconds, release the button, and press the button to adjust the current value. After the year is adjusted
4. After continuing to press the button for 3 seconds, "the month starts to flash". When the "month" number is flashing, release the button, press the button, adjust the current value, and adjust the month.
5. After continuing to press the button for 3 seconds, "the date starts to flash". When the "date" number is flashing, release the button, press the button, adjust the current value, and adjust the date. Stop the button action, complete the project setting after 5 seconds, and return to the time interface. .
Remarks: When the debugging time is minutes, year. After the first function is adjusted, then press for 3 seconds to continue debugging the next function. Do not let go of the hand for too long, otherwise it will return to the original start-up screen and have to be re-adjusted.

Packing list: 1 x Watch

Note:
Due to manual measurement, please allow 1-3 cm error, thank you
Due to screen and other objective reasons, there may be a certain color difference, please understand.