TX18 is a 3.5mm Bluetooth transmitter-receiver dual-purpose one-to-two Bluetooth adapter, which can connect two devices at the same time.

When it is used as a receiver, it is used as a Bluetooth stereo headset (only need to plug the headset cable into the 5mm interface) or connected with speakers, amplifiers, cars, boats and other devices through audio cables to achieve wireless Bluetooth for mobile phones or computers.

Transmit and play music;

Description:

Product Category:Audio Receiver
Bluetooth version: V5.0
Bluetooth chip: CSR 8670
Frequency range: 2.402-2.480GHZ
Bluetooth protocol: RX-A2D2 AVRCP TX-A2DP
Connected devices: support one for two, and connect two devices at the same time;
Support format: APTX SBC APTX-LL;
Battery specifications: 200MA;
Charging power supply: DC 5V Type-C interface charging;
Working time: 10 hours;
Size: 57*26*12.5mm;
Product weight: 16g;
Transmit mode: Check whether it is in "TX" mode before turning on the phone. Connect the TV/computer through the 3.5mm interface. The source device must be set to the external speaker mode. After the product is turned on, the Bluetooth pairing light flashes, enters the Bluetooth search mode, and turns on the receiver/Bluetooth headset/Bluetooth speaker to enter the pairing state. The light is on when the connection is successful. You can achieve audio transmission. When you need to connect the second device, double-click the multi-function button. The Bluetooth light will quickly flash and re-enter the search mode. It will automatically search for the Bluetooth receiving device to connect. The light will be on after the connection is successful;
Receiving mode: Check whether the mode is in RX; mode before turning on. Connect the speaker by toggling a 3.5mm audio cable. After turning on, the Bluetooth light flashes alternately, enter the pairing state, turn on the phone or tablet Bluetooth, search for Bluetooth "BLS-TX18", click Connect. The light stays on after the connection is successful. When you need to connect to the second phone, turn off the first connected phone, search for Bluetooth "BLS-TX18" on the second phone or tablet, click Connect, and turn on the first phone after the connection is successful, ie Two devices can be connected. The second time you use Bluetooth, you only need to turn on the product and the phone will automatically connect back.
Note: The Type-C charging interface has a reset function. It is normal for the plug-in charging interface to automatically shut down. Restart it;
Special Tip: When the battery voltage is lower than 3.1V, it will automatically shut down. In the absence of a paired device, it will automatically shut down after 5 minutes of booting. If you need to use it for a long time, you can connect the power cord DC5V and use it while charging. The product uses Type-C charging. The battery voltage is low or when charging, it may cause a current sound. When using TX18, if you are prompted to enter the pairing password, please Enter"0000"

Packing list:

TX18 main unit *1
Type-C charging cable *1
Manual *1

Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.