Suitable for paint and varnish.

Classic and comfortable handle, showing incredible controllability and balance.

Innovative trigger design, soft and comfortable, very easy to clean and maintain.

The forging gun body is compact, which can prevent paint from chipping.

Extremely fine mirror processing, the gun body looks like an excellent work of art.

Description:
Name: Cleaning Airbrush
Scope of application: car, furniture, paint
Material: aluminum, copper, stainless steel
Best spray distance: 280
Dimensions: 210*150*160
Maximum output pressure: 2.5-3
Suitable capacity: 600ml
Dimensions 20cmX15cm
Product weight 495g
Nozzle diameter 1.3mm/1.8mm
Product color black/gold
Spraying distance about 35cm
Supply method pneumatic
Spraying distance 15-24cm
Air connection G1/4
 Instructions:
1. Before spraying for the first time, you need to clean the residue in the paint channel and add it to the gun pot. Release the material, try to filter the inside of the spray gun as much as possible to ensure cleanliness.
2. Adjust the appropriate spraying air pressure when spraying
3. Control the angle and distance between the spray gun and the spray part during spraying.
4. After pulling the trigger before pre-spraying, the first gear can be used for blowing dust.
5. In the second stage, the paint flowing through the nozzle is sprayed with the pre-sprayed air and atomized at the same time
6. According to the customer's paint flow rate, adjust the spice plug to control the stroke of the gun needle, freely adjust paint flow rate.
7. According to the customer's spraying range, adjust the size, width, and width of the atomized spray to achieve complete spraying effect.
8. After use, clean the flow cap and nozzle in time (pour out the paint in the gun first, and then add after adding the thinner, shake the spray gun while buckling the board, try to let the residual inside the spray gun.
Paint sprayed out. Then remove the air flow cap for cleaning. If the air flow cap is too dirty, it needs to be soaked and diluted first
Agent-clean after a while. Be careful not to damage the holes on the airflow cap when cleaning, the airflow cap
After removing it, protect the nozzle so that the nozzle does not get hurt. Dirty cleaning, bumped nozzles,
Damage to the air cap hole will affect the atomization effect. 
Packing list:
Air Spray Airbrush * 1 set
Note: Because the size and weight are all manually measured, it is inevitable that there will be errors.