--All bus bars and fuse clips are nickel-plated copper, with corrosion resistance and excellent conductivity.

--The product has a red LED indicator design, corresponding to each electrical appliance connected to the fuse, when the fuse is disconnected, the red light will be on.

--With a sticker, which can be affixed to the electrical appliances we connected according to the name on the sticker. quickly distinguish which electrical appliance has the problem, saving time Effortless.

Description:

Product name: Independent positive and negative poles, one input and multiple output fuse box with LED indicator light [1 input 6 output]

Product Model: CS-664A1

Product Net Weight: 191g

Product gross weight: 223g

Product size: 87.75*85*36.5mm

Packaging method: Thick five-layer waterproof film coated small white box

Packing box size: 9.3*4.6*12.7cm

Product material: PBT body, PC waterproof and dustproof cover, nickel-plated copper connection terminal, PPX40 sticker

Input rated voltage: 32V

Input rated current: 100A

Maximum output current: 30A per circuit

Indicator color: red

Main line terminal: M5 threaded stud

Main wire: #4-6

Single wire terminal: M4 threaded stud

Single wire: #12-16

Indicator function: When the red LED light is on, it means that the fuse has been disconnected, and the fuse needs to be replaced in time to continue operation.

Product installation scope: It can be installed on cars, RVs, RVs, buses, yachts, boats, etc.

Product use range: It can be directly connected to the line of any electrical appliances on the car/ship [such as: car roof lights, car headlights, wide-sighted lights, fog lights, warning lights, car refrigerators, car chargers, car fans, car TV etc.]

Fuse function: When the circuit is faulty or abnormal, the current will continue to rise, and the rising current may damage some important or valuable components in the circuit, or it may burn the circuit or even cause a fire. The fuse protects the electronic equipment from overcurrent damage, and can also avoid serious damage caused by the internal failure of the electronic equipment. Therefore, each fuse has a rated specification, and the fuse will blow when the current exceeds the rated specification. If the fuse is correctly installed in the circuit, the fuse will fuse and cut off the current when the current abnormally rises to the upper limit height and upper limit temperature, thereby protecting the operation of the circuit.

Feature:

(1)The product is made of PBT flame-retardant resistant high and low temperature materials, meeting [The requirements of the fuse holder has good mechanical strength, insulation, heat resistance and flame resistance, and should not be broken, deformed, or deformed during use. Burning and short-circuit phenomena] conditions.

(2)All fasteners are made of stainless steel. The input of the fuse box and the output end are fixed with tightening screws, which can be installed more quickly. The fuse box is fixed with self-tapping screws, which is simpler and safer.

(3)The product is delivered with double fuses. When applied, the fuse is burned out and can be replaced from the spare fuses immediately, and the fuse is delivered with multiple Abes. You can choose the Abe fuse according to the current electrical appliances.

Packing list:

Fuse box*1

sticker*2

self-tapping screw*4

20A fuse*4

15A fuse*4

10A fuse*2

5A fuse*2

Note:

The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.